A Pro Rider golf trolley battery lead to fit the Pro Rider golf trolleys. This lead is easily fitted by way of opening up the battery bag and unscrewing the battery connectors either the nut or by cross screwdriver. On both the red coloured wire (positive terminal) and the black coloured wire (negative terminal). Replacing by the reverse process and making sure the wires go to the correct terminals on your Pro Rider golf trolley battery connectors. Connecting the wires the to the wrong terminals will cause some component damage in the electrics.
The Pro Rider speed control switch will fit the ProRider golf trolley as a spare part. It is fitted inside the handle, therefore the instructions for fitting this spare part are more complicated but is supported by instructions and a video in our support section.
The Pro Rider Golf Trolley wheel clutch comes in either RIGHT or LEFT clutches this depends on which side as failed and a quick rule of thumb is ( if the trolley pulls to the right is needing a new right clutch if it pulls to the left it needs a left clutch. Full fitting instructions and videos also tests for these clutch failures are available in our support section.
The trolley has a LED display circuit board on its T handle. Knowing and testing for this as a malfunction is more difficult but full testing and fitting instructions and videos for the Pro RIder circuit board failures are available in our support section.
The trolley has a LED display on its T handle. Due to this display cover having the buttons built in to it then over time the display can become worn or broken especially if finger nails are getting pressed into the display cover. The stop/start button gets at least 100 stop starts per round if not much more so over a couple of years this can get worn ad broken. So in order to make sure the weather and damp are not getting into the handle electronics and shorting or damaging them it is very advisable to replace this display panel cover. Fitting instructions and videos for the Pro RIder display cover are available in our support section.
The controller box for the Pro Rider golf trolley is located under the battery tray in a black plastic protected box with a lid held in by four cross screws. The controller is a more difficult spare part to figure out if its is the sole cause of a malfunction in the electrics. Diagnosing and fitting instructions and videos for the Pro RIder display controller are available in our support section.
With digital displays, 35 degree gradient climb capability and a battery that will last 36 holes as standard
Pro Rider have been dealing with mobility and leisure products for many years and over this time
Golf Trolley Key Features
36ah Sealed battery 36 holes to be played without charging – Battery lead
3 distance functions at the touch of a button: Handle Circuit Board has pre set 10m, 20m and 30m
dual handle control caters for left and right handed golfers
quick release puncture proof wheels with freewheel clutch
Super Lightweight aluminium frame
Super Lightweight aluminium frame
Aero dynamic battery base tray
Larger 262mm streamlined extra grip wheels
Free wheel mode
Digital display panel
Battery power display
Modern Wheel Design
Auto cut off charger to prevent over charging
Adjustable gears (with a simple turn of the speed switch power knob)
– 250W Motor comes with a 5 year warranty
– Total weight including the battery is only 19kg
– 432W rating 36ah 36 hole battery
– 35 degree gradient climb
– Folded dimensions: 820x530x320mm