Electric Golf Trolley Spares and Parts – HOME MENU

Electric golf trolley speed control fault


My Pro Rider golf trolley speed control has stopped working, can you help.  The trolley is switching on the power no faults and the display is showing as normal.  The fault lies when I try to turn the speed of the trolley up or down it won’t work.  The numbers are not moving.  Sometimes if I wiggle the speed knob it moves the speed number but most of the time is does not work.  The rest of the electric golf trolley is working fine.  Please can you help me resolve this fault with the golf trolley as it is only just over 2 years old.  Thanks, Bill

Answer to Electric Golf Trolley Speed Control Fault

The fault you describe very well sound like the faults which happen to lots of electric golf trolleys.  The knob which controls the speed is very easily damaged.  This electric golf trolley speed control can sometimes get damaged when folding up or packing away somewhere like the car boot or cupboard or hut.  This break occurs when the trolley speed switch knob is exposed and protruding then it can easily get bumped or knocked and cause damage inside the speed switch itself.

Diagnose, Symptoms and Fault Finding

The symptoms for a break of the speed control switch are as follows;

How to Fix a Golf Trolley Speed Control Fault

Fitting the new speed control switch is the reverse of the above all instructions can be found on the support page at speed control part. This fault is easily fixed by removing the knob and loosening the handle off the golf trolley and removing the speed control switch nut, then unplugging it from the circuit board.  All is needed is a cross screwdriver and point nose pliers, spanner or socket and taking a couple of cross screws out, loosening the nut holding the switch in place and unplugging it from the handle circuit.